Installation guide LED FR

Able des matières

Comment installer vos LED strips ?

How to install on wall with screws

You will need this:

All LED packages come with black aluminum rails, full-length black-matte covers, warm white LED strips, including the driver, and necessary mounting components.

Step 1: Attach aluminum rails to the felt

Secure the black aluminum rails to your panel using 30mm screws (screws not included).

How to attach rails to felt

Step 2: Attach the LED-strip on the rail

Unroll the LED strip and attach it to the aluminum rails as desired using the adhesive tape on the back of the strip. Trim any excess LED strip at the nearest cutting line.

How to attach LED to rail

Step 3: Insert the end caps

Insert the provided end caps into each end of the aluminum rails. Make sure to place the end cap with a hole in the end where the LED strip’s wire is located.

How to insert end caps

Step 4: Install the cover

Take the black-matte plastic cover and snap it onto the rails.

How to install LED cover

Step 5: Connect the LED strip to the driver

Connect the included 230V driver to the LED strip and plug the power cord into the electrical outlet. Connect the driver to the included junction box if you have multiple LED rails.

How to install LED driver

Now you are done

Comment peut on vous aider?

Téléphone

+41 61 508 73 51

E-mail

pm@woodupp.ch

Horaires d’ouverture:

Lundi au Vendredi:
8h – 12h et 13h – 16h